A wide range of products are common to battery modules
Energy Treasure can power a variety of products such as inflatable pumps, car washes, and portable lights
Tough performance, no picky vehicles
Born for professional rescue
Both big and small cars can be started
Car wireless charging stand
(optional)
It is suitable for mobile phones under 6.7 inches, and can be picked up and released at medium speed while driving, and charged steadily
Type-C fast charging port
USB Super Fast Charging
It is a starting power supply, and it is also a power bank, with a super fast charging cable, the mobile phone is full of blood in 30 minutes
15W wireless charging
Fast wireless charging for phones that support wireless charging
Support simultaneous output of multiple ports
USB, DC, wireless charging, etc. can work at the same time
Class 5A battery life system
The current is stable, the charging efficiency is high, the service life is long, and it can withstand the instantaneous strong current impact of the car
A good helper at night, three-stop light mode, switch at will
LED emergency lights
Product videos
Product: Emergency start
Model: BY-NLB152C
Size: 149mm*65.5mm
Weight: 550g
Cell: Polymer cell
Battery capacity: 5000 mAh
Battery pack: 3 strings in one, 3 pieces
Rated Capacity: 5000 mAh (12V)
Total cell capacity: 15000 mAh (3.7V-4.2V)
The starting current of the car is 300A
Peak current of car ride: 1500A
USB output: Up to 22.5W available
DC base output: voltage 12V, current up to 10A
Top copper contact output: voltage 12V, current max 10A
Wireless charging output: 5W/7.5W/15W
Type-c input: 15W
Housing Material: ABS
Waterproof rating: IPX5
Power Bank-152C
Overcurrent
protection
Short-circuit
protection
Overcharge
protection
Over-temperature protection
Over-discharge protection
Overvoltage protection
Anti-charge
protection
Enable timeout protection
It also charges quickly, about 3-5 hours to fully charge
Universal DC interface
It can supply power to 12V-100W on-board appliances, so that on-board equipment can be used without the car power supply
Procedure
1. Connect the power supply: Connect the battery clamp with the starting power EC5 interface
3. Start the car: After starting the car successfully, the starting clip needs to be disconnected from the vehicle battery within 30 seconds
4. Remove the device: Remove the power clip after the car finishes starting
2. Clamp the battery: Open the hood, and connect the clip to the positive pole of the car battery, the red clip clamps the positive pole, and the black clip clamps the negative pole
It took three years and every detail was carefully designed